Language
  • Your present position: Home PRODUCTS quartz → Top Coat 2.0
NAME Top Coat 2.0
Date 2019-07-12 16:48:17
Viewed : 357
 

Top Coat 2.0


 

Item Number: PN.H-4311

Net Content: 50ml

Common Uses: Stand alone LSP for painted surfaces, or as a topper to TacSystem coatings after full curing.

Included:

1x TOP COAT 2.0 50ml

5x Suede 10cm x 10cm

1x Suede 30cm x 30cm

1x Coating Block

Durability/Product Specs: 1year.

 
 
 
 
 
 
 

Top Coat 2.0 is a durable, glossy, and hydrophobic inorganic coating layer designed to protect all exterior vehicle surfaces, including paint, plastic, and glass. While Top Coat 2.0 was engineered as a top layer (topper) to an existing coating, it works impressively well as a stand-alone coating offering a year of superior gloss, shine, and hydrophobic properties to paint, allowing for ease of vehicle maintenance. It contains Silica, Hydrocarbon, Titanium, Zirconium and Fluorine under advanced nanotechnology.

 

TAC Top Coat 2.0 is the most advanced surface care enhancement product come from Korea. In fact, it is much different. This Coating provides the best protection on multiple surfaces, including paint, plastic, glass, and wheels. This TAC Top Coat 2.0 will be well protected your car against the harmful effects of nature.


 

Warnings: 
Always wear respirator & gloves. Ensure application area is free of loose contamination.

 
 
 
 
 
 
(In a well lit, temperature controlled below 25°C, & contamination free environment)
(Suggested section size: 1 panel at a time) Applicator Limit - Hood Size, spread evenly over the section, allow dwell time
 within 30 seconds, then wipe off with new micro fiber towel. Applicator Limit 1/2 Hood Size area - then change.
 
1. Clean and dry all exterior vehicle surfaces thoroughly. Apply out of direct sun to cool vehicle panels.
2. With a dedicated micro fiber suede ormicro fiber applicator pad, apply a small amount of Top Coat 2.0 to the applicator then begin to work it in, one panel at a time. It spreads out very well, a little goes a long ways.
3. Once applied allow Top Coat 2.0 to dwell within 30 seconds, then using a clean softmicro fiber towel, buff the surface until all excess product is removed.
 

Tips / Alternate Uses:
Can be used as a stand alone coating and also topped with Quartz Max.
 
Max Efficiency (not required):
Cure Top Coat2.0 with IR lampsat 50°C-60°C for 30 minutes.
 
Post Application Instructions:
Top Coat 2.0 requires 3-4 hours of cure time before water exposure. 
 
 
 
 
 
 


-Keep bottle tightly closed after used and store in cool dry space.

-Keep product out of reach from children.

-Wear suitable gloves. If comes into contact with skin, rinse well with water.

-If it comes in contact with eyes, rinse immediately and seek medical advice.

-Do not drink! If swallowed, consult a doctor immediately and show product container and label.

 

 

If you are interested in this item, please contact us by email.

Or if you have any questions or needs about our products, please contact us at any time.

We are also going to export this product all over the world.

86 20 37155632   82 61 7557124
tacsjc@naver.com  aceseol@tacsystem.kr
 
TACSYSTEM KOREA Corp.
Copyright ©1995 - 2019 TACSYSTEM KOREA Corp.
TACSYSTEM Development Part
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

5

电话号码管理

6

二维码管理

展开