...


Item Number: PN.H-4311Net Content: 50mlCommon Uses: Stand alone LSP for painted surfaces, or as a topper to TacSystem coatings after full curing.Included:1x TOP COAT 2.0 50ml5x Suede 10cm x 10cm1x Suede 30cm x 30cm1x Coating BlockDurability/Product Specs: 1year.   Top Coat 2.0 is a durable, glossy, and hydrophobic inorganic coating layer designed to protect all exterior vehicle surfaces, including paint, plastic, and glass. While Top Coat 2.0 was engineered as a top layer (topper) to an existing coating, it works impressively well as a stand-alone coating offering a year of superior gloss, shine, and hydrophobic properties to paint, allowing for ease of vehicle maintenance. It contains Silica, Hydrocarbon, Titanium, Zirconium and Fluorine under advanced nanotechnology. TAC Top Coat 2.0 is the most advanced surface care enhancement product come from Korea. In fact, it is much different. This Coating provides the best protection on multiple surfaces, including paint, plastic, glass, and wheels. This TAC Top Coat 2.0 will be well protected your car against the harmful effects of nature. Warnings: Always wear respirator & gloves. Ensure application area is free of loose contamination.   (In a well lit, temperature controlled below 25°C, & contamination free environment)(Suggested section size: 1 panel at a time) Applicator Limit - Hood Size, spread evenly over the section, allow dwell time within 30 seconds, then wipe off with new micro fiber towel. Applicator Limit 1/2 Hood Size area - then change. 1. Clean and dry all exterior vehicle surfaces thoroughly. Apply out of direct sun to cool vehicle panels.2. With a dedicated micro fiber suede ormicro fiber applicator pad, apply a small amount of Top Coat 2.0 to the applicator then begin to work it in, one panel at a time. It spreads out very well, a little goes a long ways.3. Once applied allow Top Coat 2.0 to dwell within 30 seconds, then using a clean softmicro fiber towel, buff the surface until all excess product is removed. Tips / Alternate Uses:Can be used as a stand alone coating and also topped with Quartz Max. Max Efficiency (not required):Cure Top Coat2.0 with IR lampsat 50°C-60°C for 30 minutes. Post Application Instructions:Top Coat 2.0 requires 3-4 hours of cure time before water exposure.    -Keep bottle tightly closed after used and store in cool dry space.-Keep product out of reach from children.-Wear suitable gloves. If comes into contact with skin, rinse well with water.-If it comes in contact with eyes, rinse immediately and seek medical advice.-Do not drink! If swallowed, consult a doctor immediately and show product container and label.If you are interested in this item, please contact us by email.Or if you have any questions or needs about our products, please contact us at any time.We are also going to export this product all over the world.

...


Item Number : PN.V-2264Net Content : 20mlCommon Uses : Vehicle GlassIncluded:1x VIEW COAT 20ml5x Suede 10cm x 10cm1x Coating BlockDurability/Specs : 6-12 months Durability Front Windscreen.      Product Description:View Coat is a glass coating formulated to help all glass repel water. Once applied with View Coat, all water drops will slide away when the car is moving from speeds starting at 30mph. View Coat The specialized formula and advanced nanotechnology in View Coat, this Glass Coating will reduce dusts and grime stains on the windscreen thus increase visibility. It contains Silica, Hydrocarbon, Titanium, Zirconium and Fluorine under advanced nanotechnology. Warnings : Always wear respirator & gloves. Ensure application area is free of loose contamination.        1. Decontaminate and polish glass until it is in best condition and free of any defects or water deposits.2. Clean Glass surface with Oil Zero to ensure all polish oils are removed prior to application.3. Wrap micro fiber suede over block and apply a small line of product to the suede.4. Apply use Suede to all glass areas in crosshatch pattern to ensure even coverage.5. Avoid any surfaces other than glass.6. After Application allow View Coat to dwell for 30 seconds. Then wipe off with clean new micro fiber towel. Max Efficiency (not required): Use IR lamps at 50°C-60°C for 30 minutes.       -Keep bottle tightly closed after used and store in cool dry space.-Keep product out of reach from children.-Wear suitable gloves. If comes into contact with skin, rinse well with water.-If it comes in contact with eyes, rinse immediately and seek medical advice.-Do not drink! If swallowed, consult a doctor immediately and show product container and label.   If you are interested in this item, please contact us by email.Or if you have any questions or needs about our products, please contact us at any time.We are also going to export this product all over the world.

...


Item number: PN.Q-1290Net content: 30ml / 50mlCommon Uses: Painted surfacesIncluded:1x Quartz Sparkle5x Suede 10cm x 10cm1x Suede 40cm x 40cm1x coating blockDurability/Specs: 3 years. Measurable thickness: 0.6um. SiO2 concentration: 90%         Product Description: Quartz Sparkle Plus is a premium glass coating offering the highest protection and durability to your vehicle body, metal and glass surfaces. It contains 90% of Silica under the chemical process of SiO2 conversion together with its prime compositions. Quartz Sparkle Plus produces maximum gloss, hard-curing protection and water repellent properties that also promote the self-cleaning effects. A single application of Quartz Sparkle Plus will coat the vehicle with a clear glass layer that shields the surfaces from all kinds of environment factors including scratches, oxidation, watermarks, acid rain and bird droppings. Quartz Sparkle Plus forms a strong bond to the surfaces, which ensures long term durability and high-level of chemical resistance. Product Benefits: Durable protection for painted surfaces. Featuring slickness, high gloss, enhance paint color differentiation and greater hydrophobic properties.    Warnings: Always wear respirator & gloves. Ensure application area is free of loose contamination. Directions/Application:(In a well lit, temperature controlled below 25°C, & contamination free environment)(Suggested section size: 1 panel at a time) Applicator Limit - Hood Size, spread evenly over the section, allow 1minutes dwell time, then wipe off with new microfiber towel. Applicator Limit 1/2 Hood Size area - then change. Tips / Alternate Uses:High spots are visible for 20-30min. If high spots are found within an hour of wipe off, they can be reactivated and removed with Quartz Sparkle Plus on anew microfiber applicator. For Optimal Results:First thoroughly wash vehicle with Ultra Foam/ Mystic Bubble/ Mystic Water Repellent then remove all embedded iron deposits from vehicle paint pores and surfaces using Iron Zero/ Iron Zero Foam. Next, polish vehicle surfaces to the highest level. After polishing, use Oil Zero to remove all polish residues from surfaces to ensure optimal bonding and durability for the coating application. Max Efficiency (not required):1. Apply Base Coat then cure with IR lamps at 50°C-60°C for 30 minutes.2. Apply Top Coat then also cure with IR lamp. Post Application Instructions:- Wait 1hr before topper can be added.- 24hrs before any water exposure.- Wait 7 days before first wash.     -Keep bottle tightly closed after used and store in cool dry space.-Keep product out of reach from children.-Wear suitable gloves. If comes into contact with skin, rinse well with water.-If it comes in contact with eyes, rinse immediately and seek medical advice.-Do not drink! If swallowed, consult a doctor immediately and show product container and label.  If you are interested in this item, please contact us by email.Or if you have any questions or needs about our products, please contact us at any time.We are also going to export this product all over the world.

...


Item Number: PN.H-4211Net Content: 100mlCommon Uses: Stand alone LSP for painted surfaces, or as a topper to TacSystem coatings after full curing.Included: 1x TOP COAT 1.0 100ml5x Suede 10cm x 10cm1x Suede 30cm x 30cm1x Coating BlockDurability/Product Specs: 1year.     Product Description: Top Coat 1.0 is a durable, glossy, and hydrophobic semi permanent layer designed to protect all exterior vehicle surfaces, including paint, plastic, and glass. While Top Coat 1.0 was engineered as a top layer (topper) to an existing coating, it works impressively well as a stand-alone coating offering a year of superior gloss, shine, and hydrophobic properties to paint, allowing for ease of vehicle maintenance.     Warnings: Always wear respirator & gloves. Ensure application area is free of loose contamination. Directions:(In a well lit, temperature controlled below 25°C, & contamination free environment)(Suggested section size: 1 panel at a time) Applicator Limit - Hood Size, spread evenly over the section, allow dwell time within 30 seconds, then wipe off with new micro fiber towel. Applicator Limit 1/2 Hood Size area - then change. 1. Clean and dry all exterior vehicle surfaces thoroughly. Apply out of direct sun to cool vehicle panels.2. With a dedicated micro fiber suede ormicro fiber applicator pad, apply a small amount of Top Coat 1.0 to the applicator then begin to work it in, one panel at a time. It spreads out very well, a little goes a long ways.3. Once applied allow Top Coat 1.0 to dwell within 30 seconds, then using a clean softmicro fiber towel, buff the surface until all excess product is removed. Tips / Alternate Uses:Can be used as a stand alone coating and also topped with Quartz Max. Max Efficiency (not required):Cure Top Coat1.0 with IR lampsat 50°C-60°C for 30 minutes. Post Application Instructions:Top Coat 1.0 requires 3-4 hours of cure time before water exposure.       -Keep bottle tightly closed after used and store in cool dry space.-Keep product out of reach from children.-Wear suitable gloves. If comes into contact with skin, rinse well with water.-If it comes in contact with eyes, rinse immediately and seek medical advice.-Do not drink! If swallowed, consult a doctor immediately and show product container and label.  If you are interested in this item, please contact us by email.Or if you have any questions or needs about our products, please contact us at any time.We are also going to export this product all over the world.

...


PN.F1001 FABRIC COAT  ltem Number : PN.F-1001Net Content : 50ml ,500ml,1000mlCommon Uses : Fabric & LeatherDurability/Specs : 1 month or more    Product Description:Fabric Coat is TacSystem newly formulated coating tailor-made for fabrics, cloth, leather and so on. It is very simple to apply and offers a super hydrophobic effect on fabrics applied. Fabric Coat provides perfect UV protection and high stain resistant for the fabrics. Fabric Coat can consequently enhance the durability and life expectancy of the material. Fabric Coat is preventing discoloration and avoiding deformation of fabric effective. Fabric Coat will be your perfect choice. Product Benefits: TacSystem’s Fabric Coat provides ultimate U.V. protection and  offers a high hydrophobic property for areas applied.Safe and easy to apply.       Warnings: If comes into contact with skin, rinse well with water. Always wear respirator & gloves during use. If it comes in contact with eyes, rinse immediately and seek medical care. Directions: Working temperature: 10-30℃.1. Clean the material well from dirt and oily residues (Best using our Multi Cleaner).2. Dry material completely.3. Shake the bottle and spray evenly all over the fabric or leather.4. Let completely dry with sunlight or heat gun.        -Keep bottle tightly closed after used and store in cool dry space.-Keep product out of reach from children.-Wear suitable gloves. If comes into contact with skin, rinse well with water.-If it comes in contact with eyes, rinse immediately and seek medical advice.-Do not drink! If swallowed, consult a doctor immediately and show product container and label.   If you are interested in this item, please contact us by email.Or if you have any questions or needs about our products, please contact us at any time.We are also going to export this product all over the world.

...


Item number: PN.Q-1331Net Content: 100mlCommon Use :  Paint surface, plastic, metal, wheels. All glass except windshield.Durability: 3 months or more Features Quartz Easy is a new paradigm of chemistry with the highest durability and superior color and slipperiness of high-performance glass membranes.This top coat is made in a new way by TACSYSTEM for easy construction of Quartz. It has excellent water repellency and durability, and has high slipperiness and excellent antifouling power.This product clearly increases the slick and natural color of the vehicle over time, and can be constructed in all areas except for the front glass.It can be constructed on a wide bone net with a small amount, and has a simple and easy workability that is applied and buffed.  Directions: Wash vehicle thoroughly. Strongly recommended to be applied out of direct sun to cool vehicle panels. After drying, apply Quartz Easy to a shaded cool panel and evenly distribute over the panel. Follow up with clean dry towel to buff off any excess product.  Tips / Alternate Uses:Quartz Easy can also be used as a topper to Tacsystem SiO2 coatings. Additionally, it can be used as a drying aid (if vehicle is mostly dry) to quickly add topical protection. Quartz Easy can also be used to darken hard and faded exterior trim pieces. Max Efficiency (not required): Use IR lamps at 50°C-60°C for 30 minutes. How to use  STEP1 - Before application, clean and dry all exterior vehicle surface throughly. STEP2 - Wrap 10*10 fibers in the coating block and apply 3-4 drops of liquid, then spread evenly one by one.STEP3 - (Work half panel at a time) Using a clean soft micro fiber towel, buff the surface until all excess product is removed.STEP4 - It takes about 3 to 4 days to fully cure.  Precautions  1. Keep out of reach of children.2. Do not use for any other purpose.3. Do not spray directly on people or food.4. When exposed to direct sunlight or high temperature, the cap may cured with bottle, then need to take appropriate measures.5. Do not forcefully remove the cap that cured on the bottle.6. After use, close the cap and store in a cool and dark place.7. Apply it in a well-ventilated area.8. Wiper vibration may occur when using the windshield, so please discontinued.9. Do not use the products with sprayer.10. Do not use inside a car. First Aid - If it comes in contact with eyes, rinse immediately and seek medical advice.- Do not drink! If swallowed, consult a doctor immediately and show product container and label.   If you are interested in this item, please contact us by email.Or if you have any questions or needs about our products, please contact us at any time.We are also going to export this product all over the world.

...


Item number: PN.Q1333Net Content: 500mlCommon Uses: Vehicle Exterior Surfaces & Wheels.Durability: 1 month or more     Product Description: A simple to apply, wipe-on / wipe-off 5% SiO2 silica sealant, leaving vehicles protected and the surface glossy and silky smooth. Quartz Max Plus is a simple streak free way to leave long lasting topical protection to your vehicle exterior surfaces.  Product Benefits:Simple wipe on protection. A stand alone durable sealant or a great way to add layer-able protection on top of coatings to help aid coating longevity.   Directions: Wash vehicle thoroughly. Strongly recommended to be applied out of direct sun to cool vehicle panels. After drying, apply Quartz Max Plus to a shaded cool panel and evenly distribute over the panel. Follow up with clean dry towel to buff off any excess product.  Tips / Alternate Uses:Quartz Max Plus can also be used as a topper to Tacsystem SiO2 coatings. Additionally, it can be used as a drying aid (if vehicle is mostly dry) to quickly add topical protection. Quartz Max Plus can also be used to darken hard and faded exterior trim pieces.  Max Efficiency (not required): Use IR lamps at 50°C-60°C for 30 minutes.   -Keep bottle tightly closed after used and store in cool dry space.-Keep product out of reach from children.-Wear suitable gloves. If comes into contact with skin, rinse well with water.-If it comes in contact with eyes, rinse immediately and seek medical advice.-Do not drink! If swallowed, consult a doctor immediately and show product container and label. If you are interested in this item, please contact us by email.Or if you have any questions or needs about our products, please contact us at any time.We are also going to export this product all over the world.