Warnings: 

Always wear respirator & gloves. Ensure application area is free of loose contamination.

Directions:

(In a well lit, temperature controlled below 25°C, & contamination free environment) (Suggested section size: 1 panel at a time) Applicator Limit - Hood Size, spread evenly over the section, allow 1minutes dwell time, then wipe off withnew microfiber towel. Applicator Limit 1/2 Hood Size area - then change.

Tips / Alternate Uses:

High spots are visible for 20-30min. If high spots are found within an hour of wipe off, they can be reactivated and removed with Quartz Power Plus on a new microfiber applicator.

For Optimal Results: 

First thoroughly wash vehicle with Ultra Foam/ Mystic Bubble/ Mystic Water Repellent then remove all embedded iron deposits from vehicle paint pores and surfaces using Iron Zero/ Iron Zero Foam. Next, polish vehicle surfaces to the highest level. After polishing, use Oil Zero to remove all polish residues from surfaces to ensure optimal bonding and durability for the coating application.

Max Efficiency (not required): 

1. Apply Base Coat then cure with IR lamps at 50°C-60°C for 30 minutes.

2. Apply Top Coat then also cure with IR lamp.

Post Application Instructions:
- Wait 1hr before topper can be added.

- 24hrs before any water exposure.

- Wait 7 days before first wash.