• Your present position: Home PRODUCTS polishing → REFINISH2 POLISHING COMPOUND
Date 2013-12-25 16:55:46
Viewed : 1103


Item number : REFINISH2

Common Uses : All exterior vehicle surfaces which can be polished.

Net content : 250ml,1000ml

Theory of Refinish Series



Diagram 1


Diagram 2


As highlighted by Figure 1, the polishing compounds have developed the style of the abrasive from its original irregular shape that easily crumbled during polishing work times. The issue with these broken abrasive pieces was often damage to the paint surface. The size of this first generation polishing compounds varied between 70~20µm. when operating on the paint surface, for best performance, the user needed to use from big sized particles to the small particles sequentially. If did not apply step by step from the small size polishing compound as the last step, there will left big swirl marks on the paint work. But even so, it still difficult to clean the swirl mark perfectly. The second generation of polishing compound adopted an octagon shape. Developed accordingly to prevent the abrasive from breaking and damaging the paint surface during the polishing time. The size of the abrasive of the second generation polishing compound varied between 20 to 2µm, and was also required to be used sequentially, in order to remove the swirl marks. However, as with the previous generation it had difficulty for removing the swirl marks clean.

The first and second generation polishing compounds are oil-based, and many other companies have not developed beyond this second generation stage. TAC has manufactured the third generation of polishing compound, the series of Refinish 1, 2 and 3. R1, 2 and 3 are using on the water-based paint surface and have adopted a tetrahedron shape for the abrasive. If taken from the front, it looks triangle in shape. This innovative design creates a stronger cutting force then the past generations of the polishing compound. The cutting force of Refinish series will decrease until the water dries out, eventually becoming zero. There are resins contented in the R1, 2, and 3, at the point in time for water dries out, the solvent will come out and the resin will enclose all around the triangles, let them become smoothly and do not hurt the paint surface, shown as in the picture 2.


Why your car needs polishing?

In the picture 3 we can see that, there are three basic layers of the paint surface, the primer layer, color layer and the clear coat. When there is dirt, scratches, and other contaminants on it, the paint surface will not so glossy. Usually these scratches, dirt and contaminants are on the clear coat. When our eyes accept more reflected rays from the surface, then it is more shine. After polishing work, the surface will become clean and smooth, therefore the direction of most reflection lights will be same, and from visual perception it is glossy.

Usually the scratches are on the clear coat, after polishing work will remove them. Of course some scratches have hurt the color layer, if so you should take other steps.



Product Description:

Refinish 2 is a very fine polish with the capability to take on much heavier defects than a traditional polish. R2 is a very efficient polish which, after following up Refinish 1, leaves the surface free of fine defects and micro-marring while leaving paint super glossy and reflective. Refinish 2’s cut and gloss characteristics make it ideal for all types of paintwork in especially to water-based paint. During this stage with Refinish 2, it will remove medium scratches, water spots and refining out machine holograms or swirl marks that might caused by step 1 leveling of paint correction.

Product Benefits:

Refinish2 is a paint correction polish formulated with non-diminishing abrasives of both natural resin and highly durable silica particles. R2 has the ability to remove 1500grit sanding scratches, light topical defects, light water spots, swirl marks and light scratches. R2 also enhances the level of gloss during the paint correction process. R2 is a low dusting, silicone free, and body shop safe product.




For best performance, please avoid working under direct sunlight, and heated paint surfaces. DO NOT allow Refinish 2 to dry on surfaces. Use ONLY on Cool vehicle exterior surfaces. If comes into contact with skin, rinse well with water. Always wear respirator & gloves during use. If it comes in contact with eyes, rinse immediately and seek medical care.


1. Shake product well before using.

2. Start with a new or clean pad. Used or dirty pads may obtain contaminants that can scratch the surface.

3. Distribute product evenly over the pad surface to ensure all portions of the pad are ready for correction.

Tips / Alternate Uses:

Refinish 2 can be used with Rotary or Dual Action Polishers, or by hand. Clean pads often for best results. Dirty pads being to scour paint when filled up with too much paint residue from the correction process.



-Keep bottle tightly closed after used and store in cool dry space.

-Keep product out of reach from children.

-Wear suitable gloves. If comes into contact with skin, rinse well with water.

-If it comes in contact with eyes, rinse immediately and seek medical advice.

-Do not drink! If swallowed, consult a doctor immediately and show product container and label.

If you are interested in this item, please contact us by email.

Or if you have any questions or needs about our products, please contact us at any time.

We are also going to export this product all over the world.

1. Shake well before used 2. Pour 4 to 5 drops on polish pad. 3. Work until the surface begins to dry.

Store in cool dry space. Keep product out of reach from children. Wear suitable gloves. If comes into contact with skin, rinse well with water. If it comes in contact with eyes, rinse immediately and seek medical advice. Do not drink! If swallowed, consult a doctor immediately and show product container and label.
86 20 37155632   82 61 7557124
Copyright ©1995 - 2021 TACSYSTEM KOREA Corp.
TACSYSTEM Development Part